Programming The Washing Period - Blomberg LDF00210W User Manual

Auto Door Opening
(Depends on the Model)
"Auto Door Opening" feature of your
machine increases drying efficiency of your
machine and saves energy. There are two
options: "OFF" and "ON".
To activate the feature of Auto Door
Opening:
1. Press Auto Door Opening button.
When the function is active, the
indicator showing the selection of the
function lights up.
2. Auto Door Opening is activated.
When you activate this function, the door
of your machine opens automatically at the
end of the washing program.
To deactivate the feature of Auto
Door Opening:
1. Press the button of Auto Door Opening.
When the function is deactivated, the
indicator showing the selection of the
function turns off.
2. Auto Door Opening is deactivated.
Auto Door Opening opens the door
of the machine at the end of the
washing circle, thanks to the "door
opening shafts". This process takes
approximately 2 minutes. If the power
fails while the shafts are moving out,
do not force to close the door. When
the power is back, the process shall be
completed, and the shafts shall return
to their initial position.
Auto Door OpeningThe function
of may change the duration of the
selected program.
Interior Lighting
(depends on the model)
Some models have interior lighting to
illuminate the interior when the door is
opened.
Floor illumination
Warning to show that machine is in
washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
Floor illumination is activated
automatically when the washing
programme starts and remains lit until
the end of the programme.
Floor illumination cannot be cancelled
by the user.
Programming the Washing
Period
Time Delay key
You may delay the start time of the program
up to 9 hours with the Delay key. Press the
Start / Pause / Cancel key after delaying.
Program starts automatically when the
delay period is over.
With each press on the Delay key, 3-6-9
hours indicators start to flash. When you
press the Start / Pause / Cancel key while
the delay indicator you have selected is
flashing, the delay indicator illuminated
continuously and the count down starts.
When the delay period is over, the delay
indicator is turned off and the washing
program you have selected starts.
The delay indicators are turned off
if you press the Delay key while the
9-hour delay lamp is flashing. When
you press the Start / Pause / Cancel
key while the delay indicators are off,
the program you have selected shall
start without delay.
You may monitor the remaining time on
the delay from the delay indicators. For
example: When you select the 9-hour
delay option, 6-hour indicator shall start
to illuminate when the remaining time
for the start of washing program is 6
hours.
33/EN