Bosch Quigo Original Instructions Manual page 28

28 | English
– Tripod: Tighten the locking screw of the tripod in the 1/4" mount (1) of the ad-
apter plate.
Press the measuring tool into the adapter plate (3) so that the locking mechanisms
of the adapter plate engage in the holes on two sides of the measuring tool. The ad-
apter plate can be fastened to the bottom, back and top side of the measuring tool.
Check that the measuring tool is firmly secured.
When the adapter plate is mounted on the back, the height of the measuring tool
can be aligned. When it is mounted on the top or bottom, the measuring tool can be
aligned sideways. Turn the fine adjustment screw (2) of the adapter plate to align
the laser line with a reference point.
Laser Goggles (Accessory)
The laser goggles filter out ambient light. This makes the light of the laser appear
brighter to the eye.
Do not use the laser goggles (accessory) as protective goggles. The laser
u
goggles make the laser beam easier to see; they do not protect you against laser
radiation.
Do not use the laser goggles (accessory) as sunglasses or while driving. The
u
laser goggles do not provide full UV protection and impair your ability to see col-
ours.
Maintenance and Service
Maintenance and Cleaning
Keep the measuring tool clean at all times.
Never immerse the measuring tool in water or other liquids.
Wipe off any dirt using a damp, soft cloth. Do not use any detergents or solvents.
The areas around the outlet aperture of the laser in particular should be cleaned on
a regular basis. Make sure to check for lint when doing this.
1 609 92A 7L9 | (28.09.2022) Bosch Power Tools