Advertisement
OPERATION GUIDE
Preparation before use
1. To achieve optimal results and better experiments, it is recommended to use wet wipes
to clean and moisturize the skin before starting your therapy.
2. Place the cotton filter ring on the transparent cupping tank and attach the tank tightly to
the device by turning it clockwise if it is unattached.
3. Attach the protection cord to the harness to prevent damage from accidental falls by
placing the ring on top of the harness, press the button, and force the ring into the
harness. You may wear the harness around your wrist during your session.
4. Make sure the device is fully assembled and charged before turning it on.
5. Turn on the device by long‐pressing the power button for about 1.5 seconds.
Advertisement
