Advertisement
Quick Links
PRODUCT INTRODUCTION
FITDASH‐II Multifunctional intelligent massager is an at‐home therapy device that is innovatively
developed by combining Chinese traditional medicine with modern technology.
This device works with 5 effective functions :
Intelligent Cupping
Hot Compress
Red Light Pulse
High‐Frequency Vibration
Magnetic Energy Field
DEVICE SCHEMATICS
Advertisement
Summary of Contents for Halipax AcheFly FITDASH-II
- Page 1 PRODUCT INTRODUCTION FITDASH‐II Multifunctional intelligent massager is an at‐home therapy device that is innovatively developed by combining Chinese traditional medicine with modern technology. This device works with 5 effective functions : Intelligent Cupping Hot Compress Red Light Pulse High‐Frequency Vibration Magnetic Energy Field DEVICE SCHEMATICS ...
- Page 2 OPERATION GUIDE Preparation before use 1. To achieve optimal results and better experiments, it is recommended to use wet wipes to clean and moisturize the skin before starting your therapy. 2. Place the cotton filter ring on the transparent cupping tank and attach the tank tightly to the device by turning it clockwise if it is unattached. 3. Attach the protection cord to the harness to prevent damage from accidental falls by placing the ring on top of the harness, press the button, and force the ring into the harness. You may wear the harness around your wrist during your session. 4. Make sure the device is fully assembled and charged before turning it on. 5. Turn on the device by long‐pressing the power button for about 1.5 seconds. ...
- Page 3 6. After the device is turned on, the suction function is automatically activated. 7. Place the device on your body, once in contact with the body, you feel the suction and red‐light pulse function, and the vibration massage function will automatically and intelligently start. CUPPING MODE KEY (M) Short press the cupping mode key (M) while the device is powered on to switch between different cupping modes (the default mode is "Mode 1: M1" when the machine is turned on). The product has 4 cupping modes: M1: Vitality mode (cupping mode light is green) M2: Soothing mode (cupping mode light is blue) M3: Depth mode (cupping mode light is red) M4: Professional mode (cupping mode is multi‐colored) ...
- Page 4 CUPPING SUCTION INTENSITY KEY Short press to adjust the strength of cupping suction (1‐5 Levels). The default setting is level‐1. The suction intensity indicator light will correspondingly display the current strength level. When the suction light indicator flashes blue and starts to move, the device is in an active working state, and the cupping suction level is displayed in real‐time. When you use it for the first time or if you have sensitive skin, please start with "Level 1". In the initial use, please pay attention to the step‐by‐step adjustment to find the mode and intensity that suits you. TEMPRATURE CONTROL KEY Short press the temperature control key while the device is powered on to adjust the heat. There are 5 Levels of temperature to choose from and the default temperature is Level‐ 1. The heating level indicator light corresponds to a different temperature level Level 1: 38°C Level 2: 40°C Level 3: 42°C Level 4: 45°C Level 5: 48°C ...
-
Page 5: Charging Instruction
EXTRA BUTTONS FUNCTIONS Short pressing the power button during therapy will stop the suction so you can remove and place it on a different part of your body and short pressing it again will turn the suction back on. Press and hold the Cupping Suction Intensity key for 1.5 seconds while the device is in use to turn the vibration on or off. Press and hold the temperature level key [sss] for 1.5 seconds while the device is in use will turn the red light pulse function on or off. Avoid looking directly at the red light When using this device with liquid products such as essential oils, or massage rubs, make sure the liquid is applied evenly on the skin surface and is fully absorbed without ant residues. COTTON FILTER REPLACEMENT This machine is thoughtfully designed with a filter device, which can filter out most of the granular or liquid impurities during the use of the product to protect the internal cleaning of the fuselage and maintain the service life of the product. Please check and replace the filter regularly according to your frequency of use. CHARGING INSTRUCTION 1. Connect the Type‐C charging cable to the adapter socket and into the wall, Powerbank, or just your PC, and connect the other end to the product charging port to start charging. 2. Adapter specification 5V = 2A. 2. When charging, please keep the Type‐C charging port dry and clean. The charging time is about 2.5 hours. 3. Avoid charging the device for more than 8 hours. 4. The charging indicator light is red during charging, and green when fully charged. 5. Avoid using the device while it is charging. 6. When the battery power is too low, it will be automatically turned off after 10 warning beeps. CLEANING & MAINTENANCE ... -
Page 6: Safety Precautions
Do not leave the product idle with moisture remaining on it. Never use hard brushes or stainless steel wire balls to wipe the device, to avoid damaging the surface. Do not use liquids such as water to directly inhale the instrument for flushing. Do not use or store this product in places prone to vibration, exposed to direct sunlight, places with high temperature, humidity, and water, places with strong electromagnetic fields, near fireworks, etc. SAFETY PRECAUTIONS 1. DO NOT use the device if you have Implanted medical electronic devices such as cardiac pacemakers. 2. DO NOT use the device if you have Life‐sustaining medical electronic devices such as an artificial heart or lungs 3. DO NOT use the device with other Medical electronic devices such as electrocardiographs 4. All Patients with any other internal implanted medical devices. 5. Always keep the device out of reach from children for safety and to prevent the risk of injury. 6. Avoid using the device on scars and wounds 7. If you feel unwell during or after use, please stop using it immediately and consult a doctor 8. Avoid using the device close to the heart to prevent the risk of heart fibrillation 9. This product contains lithium batteries, please do not disassemble or modify it yourself, soak it in water or throw it into the fire to prevent damage to the product and to avoid an explosion. 10. Avoid using the device for more than 12 minutes on one spot as it may cause a low degree burn on your skin. ... - Page 7 18. Do not use on patients with high neuroticism, high fever, convulsions, convulsions, manic restlessness. 19. Never use the device on facial features, private parts, or large blood vessels on the body surface. ...