Table of Contents
Advertisement
Quick Links
Check Your Blood Glucose
Using
choose the
1.
checking your BG (blood glucose) before
a meal or choose the
checking your BG after a meal.
2.
Insert test strip wait for the
"Apply A Drop of Blood" message to appear.
3.
Apply a drop of blood to test strip.
Wait for the meter to count down and display
4.
your test result.
icon if you are
icon if you are
icon and the
Advertisement
Table of Contents
Related Manuals for iGlucose Cellular diabetes care system
Summary of Contents for iGlucose Cellular diabetes care system
- Page 1 Check Your Blood Glucose Using choose the icon if you are checking your BG (blood glucose) before a meal or choose the icon if you are checking your BG after a meal. Insert test strip wait for the icon and the “Apply A Drop of Blood“...
- Page 2 Meter Messages The meter will count down from 5 to 0 • seconds. After 5 seconds your blood glucose result • will be displayed. Your reading has been sent to the cloud • and you can access it on the portal.
- Page 4 We hope you enjoy using the iGlucose Cellular Diabetes Care System ® For assistance, please contact us at 1-844-iGlucose (1-844-445-8267) or Email us at support@iglucose.com...
- Page 5 Quick Start Guide Meter, Test Strips and Lancing Device...
-
Page 6: Important Safety Instructions
After use, all parts of the kit are considered biohazardous and can • potentially transmit infectious diseases, even after following the cleaning and disinfecting procedures. Refer to your Owner’s Booklet for more important information and • detailed instructions on how to use and clean your iGlucose Meter and Lancing Device. -
Page 7: Intended Use
Intended Use The iGlucose® Blood Glucose Monitoring System is intended to be used for the quantitative measurement of glucose (sugar) in fresh capillary whole blood samples drawn from the fingertips. The iGlucose Monitoring System is intended to be used by a single person and should not be shared. -
Page 8: Get To Know Your System
Get To Know Your System Blood Glucose Meter Test Strip Port Display Window Button HOME Button Button DOWN • Indicates a control solution test result mg/dL • Unit of test result • Test result • Battery fully charged • Battery is low and must be recharged •... -
Page 9: Lancing Device
Test Strip Sample Entry Apply a drop of blood or control solution here. The test requires 0.75uL of blood. Hold Bar Noble Metal Electrodes Hold the strip here when Electrochemical inserting into the strip port. sensor Indication Symbol View Window Insert strip with indication Window will turn from yellow symbol up and toward meter. - Page 10 101-3GM291-022 EN(US) MQSG01-EN Rev 2020.02...
Need help?
Do you have a question about the Cellular diabetes care system and is the answer not in the manual?
Questions and answers