PHILODO P7 Owner's Manual page 23

Setting Function
Odometer
P17
Reset
Ensure you do not change settings that are not listed in the
table. Changing other settings may cause your bike to stop
working properly. If you need the default settings for the
advanced settings menu contact Philodo Bikes.
Changing the Top Speed
You must check your local laws and regulations to determine if
it is lawful to ride this bike on public roads before adjusting
the bike's top speed. Laws vary by trail, path, and road so be
sure to check in each new location you will be riding.
To change the top speed of the bike:
1. Access the settings menu by pressing and holding the up
and down buttons of the display simultaneously until the
screen says "P01".
2. From here you can cycle through settings by hitting the
power button of the display and adjust the settings by
pressing the up or down buttons.
3. Please go to setting "P08" and change this setting from 100
to 25 (Suppose you want to adjust the maximum speed to no
more than 25km/h).
4. Press and hold the up and down buttons on the control pad
until the main screen is shown once again.
5. Power the bike off by holding the power button to save the
settings you have just changed.
Battery Capacity Display
On the top of the LCD display, a battery indicator bar can be
found which is labeled "energy bar". This battery indicator
Default
Hold the plus button for 5 second
to reset the Odometer. In some
NA
production batches, P16
represents this function.
22
Explanation