Room 2 Source Playback - LG LGAV410 Owner's Manual

Room 2 Source Playback

This function allows enjoying one source in the main room
l l
and playing another in a different room at the same time.
The analog signals from the 7.1 CH DIRECT inputs and
l l
TAPE MONITOR INs as well as the digital signals from the
coaxial or optical digital input cannot be output from the
ROOM 2 OUTs, meaning no playback in a different room.
When you connect the multi - room adapter to the MULTI -
l l
ROOM jack of this unit, you can control this unit with its
remote control unit in a different room, too. (For details,
refer to "CONNECTING MULTI - ROOM SYSTEM KIT" on
page 8.)
Press the ROOM 2 button.
1
ROOM2 FEED
or
"R2" is flickering for 3 seconds and the ROOM 2 function is
l l
activated.
To cancel the ROOM 2 function, press it again.
l l
Then "R2" goes off.
You can cancel the ROOM 2 function with using these
l l
buttons even in the standby mode.
Select the desired input as a ROOM 2 source
2
while "R2" is flickering.
AUDIO VIDEO
or
TUNER CD
VID1 VID2 VID3
The selected ROOM 2 source is displayed for 3 seconds as
l l
follows : (R2) TUNER, (R2) CD, (R2) AUX, (R2) VIDEO
1~4.
Only these sources can be played in another room.
l l
When an audio program source is selected, as a ROOM 2
l l
source, the image of the video program source selected
previously can be played separately, too.
(For details, refer to "SETTING THE ROOM 2 FEED
SETUP"on page 37.)
Only while "R2" is flickering, the volume level for the ROOM
l l
2 source can be adjusted.
When "R2" is not flickering and lights up, press the ROOM
l l
2 button again briefly twice.
DVD
VOL. CH LEVEL
OSD CH SEL
ENTER
RPT INTRO
A B
TITLE
7.1 SURR RETURN
AUTO
DSP
MODE
ST
DISC TEST CENTER
P.SCAN TONE MODE
TUNER CD T1/MON AUX PHONO
VID1 VID2 VID3 VID4 VID5
ROOM2
SYS DISP SLEEP DIRECT IN ROOM2
DVD
VOL. CH LEVEL
OSD CH SEL
ENTER
RPT INTRO
A B
TITLE
7.1 SURR RETURN
AUTO
DSP
MODE
ST
AUX DISC TEST CENTER
P.SCAN TONE MODE
TUNER CD T1/MON AUX PHONO
VID1 VID2 VID3 VID4 VID5
VID4
SYS DISP SLEEP DIRECT IN ROOM2
Start play on the component related to the
3
ROOM 2 source.
x x Notes:
Even when this unit enters the standby mode, in
l l
such a case that "R2" lights up still and the STAND-
BY button lights up in blue as it does in the operating
mode, meaning only the ROOM 2 circuitry operates,
the ROOM 2 source selected previously can be
played independently.
When you do not use the ROOM 2 function, cancel
l l
the ROOM 2 function to save electricity.
For ROOM 2 volume adjustment, refer to "SETTING
l l
THE ROOM 2 FEED SETUP" on page 37.
29