Advertisement
Caution: This amplifier is heavy!
Lift the amplifier out of its packing by
using the two "hand cut-outs" in the
bottom packing near the transformers.
Or you may find it easier to remove the
unit using the following procedure:
1.
With the top packing in place, turn
the box "upside down" with the "flaps"
open.
2.
Lift the cardboard box off.
3.
Remove the bottom packing first.
4.
Turn the unit the right way up and
remove the top packing.
Please be careful not to damage any
small switches and knobs on the
front and rear panel
When re-packing ensure small switches do not foul
packaging, the two hand cut-outs are normally towards
the rear of the amplifier.
Do not ship with the valve cover as damage is likely to
occur, unless you have the original packing. Or send
separately. Do not return valve cover for service.
(Please keep this information for future use).
Page 10
Advertisement
