Advertisement
MPD-5/24S-4C Light Controller
Technical Instructions
This product is our programmable digital controller designed to drive machine
vision LED light source. It has the functions of 256 levels of brightness setting,
light source switching, hardware external trigger light source switching, manual
brightness adjustment, digital display, etc. for LED light source remotely
through RS232 interface. It is especially suitable for complex and high-end
machine vision equipment.
The controller has a mature design, reasonable technology, and stable quality
of selected materials, which ensure a high degree of reliability and strong
adaptability to the environment. At the same time, the controller has the
advantages of small size and simple structure.
1
Advertisement
Table of Contents
Related Manuals for Mvotem Optics MPD-5S-4C
Summary of Contents for Mvotem Optics MPD-5S-4C
- Page 1 MPD-5/24S-4C Light Controller Technical Instructions This product is our programmable digital controller designed to drive machine vision LED light source. It has the functions of 256 levels of brightness setting, light source switching, hardware external trigger light source switching, manual brightness adjustment, digital display, etc.
- Page 2 Electrical Parameters Voltage Range 88-264VAC INPUT Frequency Range 47-63HZ Type constant current Port 5V Port 24V Adjustment Range 0-100% OUTPUT ≤0.4A Max Current Per port Brightness Adjustment Button/host computer 256 levels Brightness adjustment level Mode TRIGGER Trigger Level 5-24V PROTECTION Surge protection;...
- Page 3 P2 Operation panel diagram (back) Note: CH1 and CH2 is 24V port, CH3 and CH4 5V port. 3. Wiring Power Output Wire Connection： P4 Output Connector 24V Plug in model：SMP-03V 1: (to light) 2: NC 3: - (to light) 5V Plug in model：SMP-03V...
- Page 4 1: + (to light) 2: (to light) 3: NC RS232 COM：PC port and RS232 plug should be connected with cable extender. P5 RS232 Plug External Trigger Power Input Wire Connection： P6 External Trigger 4. Operation Instruction 1. Manual Mode The brightness can be adjusted by the button on the front panel. Choose the target‘CH’...
- Page 5 quickly. The brightness level value has a memory function, and will not be lost when the power is turned off. 2. Hardware Trigger Working Mode MANU is manual mode, when the trigger current is 0V, the lighting source output works, when the trigger current is 5-24V,the lighting source output shuts down.
- Page 6 P7 Demo Interface Structure...
Need help?
Do you have a question about the MPD-5S-4C and is the answer not in the manual?
Questions and answers