Advertisement
MPA-5/24S-4C Light Controller
Technical Instructions
The product is a 400mA four-channel constant current controller designed for
driving LED light sources, with two output channels for 5V spot light sources
and two output channels for 24V light sources, and the output of each channel
can be adjusted independently by the brightness adjustment knob, thus
realizing the adjustment of LED light source brightness.
The controller is small in size and simple in structure; the high accuracy of
output constant current ensures the consistency of illumination when the LED
light source works, and at the same time, extends the life of the LED light
source products. The design is mature, the process is reasonable, and the
quality of the selected materials is stable, ensuring a high degree of product
reliability and strong environmental adaptability.
1
Advertisement
Table of Contents
Related Manuals for Mvotem Optics MPA-5S-4C
Summary of Contents for Mvotem Optics MPA-5S-4C
- Page 1 MPA-5/24S-4C Light Controller Technical Instructions The product is a 400mA four-channel constant current controller designed for driving LED light sources, with two output channels for 5V spot light sources and two output channels for 24V light sources, and the output of each channel can be adjusted independently by the brightness adjustment knob, thus realizing the adjustment of LED light source brightness.
- Page 2 Electrical Parameters Voltage Range 88-264VAC INPUT Frequency Range 47-63HZ Type constant current Port 5V OUTPUT Port 24V Adjustment Range 0-400mA Angle of the knob 300° Mode TRIGGER Trigger Level 5-24V PROTECTION Surge protection; Over current protection; Overheat protection. Operating Temperature 0 ～...
- Page 3 P2 Operation panel diagram (back) Note: CH1 and CH2 is 24V port, CH3 and CH4 5V port. 3. Wiring Power Output Wire Connection： P4 Output Connector 24V Plug in model：SMP-03V 1: (to light) 2: NC 3: - (to light) 5V Plug in model：SMP-03V 1: + (to light) 2: (to light)
- Page 4 3: NC External Trigger Power Input Wire Connection： P6 External Trigger 4. Operation Instruction 1. Manual Mode CH1 to CH4 are the knobs to change the brightness of channel 1 to 4 respectively (by clockwise rotating). 2. Hardware Trigger Working Mode MANU is manual mode, when the trigger current is 0V, the lighting source output works, when the trigger current is 5-24V,the lighting source output shuts down.
- Page 5 5. Structure...
Need help?
Do you have a question about the MPA-5S-4C and is the answer not in the manual?
Questions and answers