Table of Contents
Advertisement
Connecting the Display
Using the Computer
1.
Place the monitor in a convenient, well-ventilated location near your computer.
To adjust height of your monitor, unlock the stand lock on top of the stand.
2.
Connect the signal cable. When attached, tighten the thumbscrews to secure
the connection.
3.
Connect the power cord into a proper power outlet
that is easily accessible and close to the display.
Power Cord
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
Signal Cable
Digital signal
Analog signal
*
*
- DVI
D-sub
* Varies according to model.
*
Wall-outlet type
*
PC-outlet type
PC
When connecting DVI signal cable
When connecting D-Sub signal cable
MAC
A5
2
Mac adapter
For Apple Macintosh use, a separate plug
adapter is needed to change the
15 pin high density (3 row) D-sub VGA
connector on thesupplied cable to a
15 pin 2 row connector.
1
Advertisement
Table of Contents
