Page 2
Assembly Instructions: 1. Install Bottom- and Top- to LH Side- by aligning dowels. Ensure back dados all align. Secure with XAUR Decorative Screws with 4mm Hex Wrench provided. XAUR 2. Install 4 Shelves- with rounded edge down. Secure with 8- Decorative Screws with 4mm Hex Wrench provided.
Page 3
4. Install 20 Dividers- with rounded edge down into grooves, insert bottom and top row by angling into groove and snapping into place. 5. Insert Top and Bottom Backs- by inserting into side groove on one end, bowing into other groove on opposite end, and sliding up into full length grooves on Top and Bottom.
Page 4
XCPT 7. Locate predrilled holes in middle shelves and install 6- Washer head Screw. 8. Stand unit upright.