Page 1
Adult assembly required. Attention: This unit must be attached to a wall to prevent tipping over!! Tools Required: -4mm Hex Wrench, (Provided) -Medium Phillips Screwdriver Instructions for: 211115 Bookshelf Hardware Illustrations Hardware Package HCKJ Qty. Description (1) XAUS 4mm Hex Wrench (8) XAUR 2"...
Page 2
Assembly Instructions: 1. Install Top- , Bottom- , and 2-Rails- to Side- by aligning dowels. Ensure back grooves all XAUR align. Secure with 4- Decorative Screws with 4mm Hex Wrench provided. YIFH 2. Place 3-Backs- with Plastic Moulding between them over Rails and into back grooves of the Top and Bottom.
Page 3
XBTX 4. Secure Backs by installing 12- Truss Head Screws using a Phillips Screwdriver. XAMT 5. Stand unit upright. Determine height location desired for shelves and install 16- Camlock Bolts into Sides. Set Shelves- on the camlock bolts and lock the shelves into place by turning the metal center piece of the cam-locks under the shelves ¼...
Page 4
6. Attach the unit to a wall to prevent it from tipping over. Locate wall studs and secure Bookshelf to XAFH wall using supplied -3” Drywall Screw. 7. If you experience any difficulties when assembling this product, please contact the Jonti-Craft Customer Relations Team at (800) 543-4149 or sales@jonti-craft.com.