Table of Contents
Advertisement
3. Operation Instructions
3.1. AC Leakage Current Measurement
WARNING: Make sure that all the test leads are disconnected from the meter's
terminals for current measurement.
3.1.1. Leakage Current Flowing into Ground Conductor
a. Set the rotary switch at desired range.
b. Press the trigger to open the jaw and fully enclose the wire goes to the
ground. Make sure the two half jaws are properly closed.
c. Read the measured value from the LCD display.
4
Advertisement
Table of Contents
Need help?
Do you have a question about the CM-03 and is the answer not in the manual?
Questions and answers