Page 2
2022/9 SPC100R Features 1. For Z/N/TT/S/HO/OO/O/1/G gauge 2. Power by Mini USB 5V 3. Large LCD display 4. Freely switch Z/N/TT/S/HO/OO/O/1/G gauge 5. Divided into four regions, the United States, the United Kingdom, Europe, and Japan. 6. Two detection modes, reflective and occlude.
Page 3
1. Use a 5V adapter for the power supply. 2. The power 5V is plugged in by Mini USB. 3. After turning on the power, the LED lights up and the LCD display “drM SPC100R”. 4. After 3 seconds, it will directly enter the detection state.
Page 4
Switch mode 1. The SPC100R has two detection modes (reflection and occlude 2. The train body color is a bright color system using reflection mode. 3. The train body color is a dark color system using mode.
Page 5
2022/9 After confirmation, the following screen will appear. Place the vehicle in front to measure the distance. Clockwise rotation detection is weak. Counterclockwise rotation detection is strong. Adjust VR until the LCD shows OK!!
Page 6
2022/9 Switch KM/H, MPH Before powering on, press KEY1 and power on again until the menu appears. KEY1 selects the SPEED UNIT, KEY2 confirms. KEY1 unit selection, KEY2 confirm unit. After the unit is confirmed, it will be automatically saved. Lap timing ...
Page 7
2022/9 KEY2 enter Lap timing. When the vehicle passes through the detection area, it will start timing, and it will stop when it passes again. The end of the display time is about 3 seconds, after which it will enter the detection state again.
Page 8
Select the external connector, please connect the SPC100RE detector. Do not connect external connectors other than SPC100 series to avoid damage to the host. Precautions Do not place any conductive materials (liquid, metal...) on the SPC100R. Do not remove or replace any components under the speedometer. ...
Need help?
Do you have a question about the SPC100R and is the answer not in the manual?
Questions and answers