Installation, Operation
and Maintenance Manual
Installation, Operation
and Maintenance Manual
TurboTAC Salt-Free Limescale Prevention
and Water Filtration
OneFlow+ Salt-Free Scale Prevention
Model: Compact
and Water Filtration
Model OFPSYS
WARNING
!
Please read carefully before proceeding with
installation. Your failure to follow any attached
instructions or operating parameters may lead to the
product's failure.
Keep this Manual for future reference.
!
WARNING
Untreated private well water may contain contaminants
with levels outside of the operating guidelines. Do not use
with water that is microbiologically unsafe or of unknown
quality without adequate disinfection before or after the
system.
IMPORTANT
If you are unsure about installing the filter, contact your supplier or consult a professional plumber.
NOTICE
Failure to install the system correctly voids the warranty. Handle all components of the system with care.
IMPORTANT
If you are unsure about installing your WATTS water filter, contact
Do not drop, drag or turn components upside down. Use wall mounting bracket provided and fix securely.
a WATTS representative or consult a professional plumber.
If installed on the floor, be sure the floor under the water filter system is clean, level and strong enough to
CAUTION
!
support the unit.
Test the water periodically to verify that the system is performing
satisfactorily. Discard small parts remaining after the installation.
NOTICE
Failure to install the system correctly voids the warranty.
Handle all components of the system with care. Do not drop,
Next Filtration / www.abtapdirect.com
drag or turn components upside down.
Be sure the floor under the water filter system is clean, level
and strong enough to support the unit.
TurboTACCompact
hard water, easy solution.
OFPSYS
BS6920
CERTIFIED
Certified to
NSF/ANSI 42/61
OFPSYS OneFlow+™ system is certified
by the Water Quality Association (WQA) to
NSF/ANSI Standard 372 for lead free.
IOM-WQ-OneFlow+
Need help?
Do you have a question about the TurboTAC Compact and is the answer not in the manual?
Questions and answers