Table 30: Swivel Lifting Eyes; Table 31: Ring Nuts To Be Used - ABB HT584532 Operation Manual

Operation Manual / 4 Product description / A130-H.. - A140-H
8 Dismantling and fitting / 8.1 Introduction
¡
Assembly device
Devices that are fitted on the turbocharger in order to obtain a suspension point. As-
sembly devices are specially constructed and designed for the defined use; they are not
commercially available products. Use assembly devices only for the described applica-
tions.
¡
Lifting gear
Equipment for the lifting and transporting of loads (ropes, chain block, crane). Lifting
gear is not supplied by ABB.
Swivel lifting eyes to be used
Two swivel lifting eyes are required for the safe lifting of loads, these are not supplied by
ABB Turbo Systems.
Swivel lifting eyes
Table 30: Swivel lifting eyes
Two ring nuts are required for safer lifting of the cartridge group, which are not included in
the ABB Turbo Systems scope of delivery.
Ring nuts to be used (VRM)
Starpoint ring nut VRM
Table 31: Ring nuts to be used
© Copyright 2018 ABB. All rights reserved.
Product Thread Length
M
A130 M10 17 mm
A135 M10 17 mm
A140 M12 21 mm
Product
A130
A135
A140
HZTL4030_EN
Minimum Quantity
L load limit
100 kg
150 kg
250 kg
Thread
M16
M16
M16
Revision E September 2018
2
2
2