Operation Manual / 4 Product description / A130-H.. - A140-H
8 Dismantling and fitting / 8.15 Installing the compressor casing
Installing the compressor casing
Fig. 46: Installing the compressor casing
Part number
72011
Table 40: Tightening torque (72011)
1. Fit a new, high temperature-resisting O-ring (42012, red or green) (see chapter
customer spare part set (97070)
2. Thoroughly clean the fastening strips (72012) before assembly.
3. Attach swivel lifting eyes (01) to the compressor casing (72000) and lifting gear.
4. Install the compressor casing (72000).
5. Install the fastening strips (72012) with screws (72011).
© Copyright 2018 ABB. All rights reserved.
A130
M8
35 Nm
→89).
HZTL4030_EN
A135
M10
70 Nm
Revision E
A140
M12
105 Nm
Required
September 2018