ABB HT565485 Operation Manual page 71

Operation Manual / 4 Product description / A100-L
6 Periodic maintenance
Figure 15: Attaching new filter ring
Attach the new filter ring (81265) on the filter ring to be replaced so they overlap.

Figure 16: Fitting new filter ring
Pull on the old filter ring until the new filter ring is completely wrapped around the filter si-

lencer.
Undo the connection between the new and the old filter ring.

Fasten the newly installed filter ring (81265), then fit circumferential part (9).

© Copyright 2016 ABB. All rights reserved.
HZTL4034_EN
Page 41 / 111
Revision G
October 2016