Beko WMY 121444LB1 User Manual page 19

4.3.7 Spin speed selection
Whenever a new programme is selected, the recommended spin speed of the selected programme is
displayed on the Spin Speed indicator.
C
It is possible that the recommended spin speed value is not the maximum spin speed that can be selected for the current
programme.
Press the Spin Speed Adjustment button to change the spin speed. Spin speed decreases gradually.
Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the display.
C
Spin Speed Adjustment button only serves for decreasing the spin speed.
Rinse Hold option is indicated with "ı_ı" symbol and No Spin option is indicated with "_" symbol.
If you are not going to unload your laundry immediately after the programme completes, you can use Rinse
Hold function in order to prevent them from getting wrinkled when there is no water in the machine.
This function holds the laundry in the final rinsing water.
If you want to spin your laundry after the Rinse Hold function:
- Adjust the Spin Speed.
- Press Start / Pause / Cancel button. The programme resumes. Machine spins the laundry by discharging
the water.
If you want to discharge the water at the end of the programme without spinning, use No Spin function.
C
No change can be made in programmes where spin speed adjustment is not allowed.
You can change the spin speed after the washing starts if the washing steps allow it. Changes cannot be
made if the steps do not allow it.
Rinse Hold
If you are not going to unload your clothes immediately after the programme completes, you can use rinse
hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled
when there is no water in the machine. Press Start / Pause button after this process if you want to drain the
water without spinning your laundry. Programme will resume and complete after draining the water.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button.
The programme resumes. Water is drained, laundry is spun and the programme is completed.
4.3.8 Auxiliary function selection
Select the desired auxiliary functions before starting the programme. Whenever a programme is selected,
frames of the auxiliary function symbol that can be selected together with it illuminates. And when you select
an auxiliary function, the interior area of the auxiliary function symbol also starts to illuminate.
C
Frame of the auxiliary function symbol that cannot be selected with the current programme does not illuminate.
Also the frames of the auxiliary function suitable for the current programme after the washing has started
remains illuminated. You can select or cancel the auxiliary functions whose frames are illuminated. If the wash
cycle has reached a point where you cannot select the auxiliary function, the function's frame turns off.
Washing Machine / User's Manual
88
C
0
88:88
1888
88
0 C
88:88
1888
19 / EN