Advertisement
7. OS/2 Driver Installation
4 Adapter-Options :
/A:n
Adapter Identification. Where n is a decimal value. This option specifies the order-
ing of adapters. Normally, adapters are numbered consecutively, starting at 0.
/BUS:n
PCI Bus Number which ASUS PCI-DA2000 Series is plugged in. You can get the
PCI bus number from the information that ASUS PCI-DA2000 Series BIOS dis-
plays at system bootup.
Note: ASUS PCI-DA2000 Series BIOS displays bus number in hex value, you
must translate that into decimal value.
/DEV:n
PCI Device Number which ASUS PCI-DA2000 Series is plugged in. You can get
the PCI device number from the information that ASUS PCI-DA2000 Series BIOS
displays at system bootup.
Note: ASUS PCI-DA2000 Series BIOS displays device number in hex value,
you must translate that into decimal value.
/(!)ET
(Disable) Enable Embedded Target Support. Makes the driver (disable) enable not-
zero SCSI LUN support to the specified adapter by /A:n . Default setting is /ET.
/(!)DM
(Disable) Enable Direct Access Storage Device (DASD) Manager Support. (Dis-
able) Enable all the units, connect to the adapter specified by /A:n, to be supported
by the IBM-supplied DASD manager (OS2DASD.DMD). The default setting is /
DM.
/(!)SM
(Disable) Enable SCSI Manager Support. (Disable) Enable all the units, connect to
the adapter specified by /A:n, to be supported by the IBM-supplied SCSI manager
(OS2SCSI.DMD). The default setting is /SM.
5 Unit-Options :
/(!)ET:i1,i2,i3....
(Disable) Enable Embedded Target Support. Where i1,i2,i3 is the specified SCSI
Target ID. Makes the driver (disable) enable not-zero SCSI LUN support to the
specified SCSI ID of the specified adapter by /A:n. Default setting is /ET.
ASUS PCI-DA2000 Series RAID Controllers Driver Installation
67
Advertisement
