Flowtron ACS900 Quick Reference Manual

QUICK REFERENCE GUIDE - USE
Flowtron ACS900
Compliance Monitoring
Compliance Monitoring; records and displays
actual therapy as well as non-compliant time. Alerts
upon garment removal to facilitate tracking and
documentation of IPC therapy.
Enable/Disable Compliance
Monitoring
1. Configure Compliance Monitoring:
• Make sure no garments are connected to the
pump.
• Press and hold the middle control button to
access the setup screen.
2. Press the left button to cycle through the options:
• ON with Audible alert enabled
• ON with Audible alert disabled
• OFF (Pump run-hour time is displayed instead
of accumulated therapy time)
ON/OFF
3. Press the middle control button to select the
displayed option.
Reset the Compliance Monitoring
(accumulated therapy time)
1. When the pump is in Standby, press and hold
2. Press the right control button again to confirm. If
Start therapy
1. Apply the garment to the patient.
2. Connect the garment to the pump.
3. Press the middle control button to start therapy.
08.FL.01_01EN • 09/2022 • Page 1/2
the right control button for 2 seconds. The time
flashes for 2 minutes. Press and hold the middle
control button for 3 seconds to reset the time to
zero.
the button is not pressed within two minutes, the
timer will NOT be reset and will go back to show
the original data.
"Click"