Advertisement
7.4.6 Set up frame rate setting, use OK to select 1, 2, 5, 10,15fps
7.4.7 Set up recording duration, press UP/DN to select 5, 10, 20, 30sec
Remark: This recording duration is only applied to the auto capture. At manual capture
mode, if frame rate is set to 1 or 2fps, there is no limit of capture duration until memory
full. But when frame rate is set to 5, 10 or15fps, the max duration is limited to 30sec.
This will keep the system more stable.
NOTE: Default is full screen MD about Motion detect area.
8. Alarm Output
If the active channel has a motion detected, it will output an active low signal to Alarm Out, user can
connect it to trigger external device such as siren. Note, this feature is only active at motion detect on
and only main viewing channel in PIP mode.
Icon Definition
Set up Menu
Date Time setup
Motion Detect On or Off
Select Photo or Video
Advance Set up
Return to preview mode
Motion Detect count
Motion detect sensitivity
AVI duration setting
Photo Management
Delete one photo
Delete all photos
3
Advance Set up
Quit Menu
Select image quality Hi
or Low
Motion detect interval
setting
AVI frame setting
Quit
Format memory, clear
all files
rev 1.0
Advertisement
