Connections Pin 1, Pin; And Ground (Pin - Cleveland Steam Oven Network Installation Manual

SHOWS WIRE CONNECTIONS PIN 1, PIN 2, AND GROUND (PIN 6).
7. For the adapter to output data for RS485, a jumper inside the metal case must be
positioned correctly. This photo shows the position of the #1 jumper. All other
jumpers should be in the original position.
8. Place the metal cover back on the adapter and secure the screws.
9. The adapter is now ready for use with the PC-HACCP.
Place
connect
jumper #1
Jumper #1 Position
29