Advertisement
ENOITALIA S.r.l.
Instructions for use and technical manual
Self-priming electropumps "ENOS"
Enoitalia S.r.l. with registered office and operations in the municipalità of Cerreto Guidi (FI) Fraz.
Pieve a Ripoli, via Prov. Pisana, 162, operating in the oenological sector as constructor and vendor
of the following machines:-
CENTRIFUGAL PUMP ENOS 20-25-30-35-40
under its own responsibility that the product mentioned above is compliant with the following EC
regulations, including the latest changes, and with the relative national legislation that incorporates
them.
2006/42CEE, 73/23CEE, 89/336CEE, 89/366CEE, 2000/14 CEE
Cerreto Guidi , 02/02/2008
INTRODUCTION
manual is an integral part of the machine itself.
We suggest this electro-pump be used to pump filtered liquids suitable for human consumption and
other liquids and, in particular, for pumping WINE, OIL, MILK, WATER.
It is not suitable for pumping inflammable liquids or to be operated in environments with an
explosion hazard. Do not use with petrol, concentrated acids or solvents.
It is not suitable for pumping liquids containing solid parts in suspension of over 0,5% as these can
wear the machine's internal components.
The constructor declines every responsibility for damage deriving from an improper user of the
electropump, or from the user's failure to comply the instructions herein contained.
1. DESCRIPTION
The centrifugal electro-pump is composed of the following parts:-
• Electrical motor
• bronze/ stainless steel pump body
• Bronze / stainless steel impeller
• Controls panel
DECLARATION OF E.C. COMPLIANCE
HEREBY DECLARES
Before installing the machine read the instructions that follow carefully as this
Enoitalia srl
Falorni Fabio
Advertisement
Table of Contents
Related Manuals for Enoitalia ENOS
Summary of Contents for Enoitalia ENOS
- Page 1 Self-priming electropumps “ENOS” DECLARATION OF E.C. COMPLIANCE Enoitalia S.r.l. with registered office and operations in the municipalità of Cerreto Guidi (FI) Fraz. Pieve a Ripoli, via Prov. Pisana, 162, operating in the oenological sector as constructor and vendor of the following machines:-...
- Page 2 The body of the pump can be opened easily by unscrewing the fastening screws, allowing maintenance and cleaning operations to be carried out quickly and efficiently. WARNING ! Before starting any control or maintenance operation, remove tension from the electrical system and pull out the plug from the socket. The pump is of the centrifugal, self-priming type able to function in both directions of rotation thanks to the electrical changeover switch placed on the controls panel.
- Page 3 Pump attachments should be lubricated to facilitate the assembly of the hose fittings and avoid seizures. WARNING ! all repair work must be executed directly by Enoitalia srl or by qualified and specialized personnel In case of any repair work, only the original exchange parts must be used which can be obtained by contact the reseller or constructor.
- Page 4 Read every part of this manual carefully before using the machine and keep it for future • reference. Enoitalia S.r.l. is not responsible for damage caused by changes made to the machine by • third parties. Enoitalia S.r.l. reserves the right to make construction changes at any time without being •...
Need help?
Do you have a question about the ENOS and is the answer not in the manual?
Questions and answers