Advertisement
LARGE PIECES
A
B
Left Armrest
Right Armrest
Seat Panel
1
1
E
F
Seat Cushion
Back Cushion
Read all instructions before assembly and
use of this product. Failure to follow these
instructions and warnings could result in
injury or damage to the item. Keep these
instructions for future reference.
1
1
SMALL PIECES
G
H
Small Allen Bolt
Large Allen Bolt
Bolt Cap
4
6
10
ASSEMBLY NOTES
•
Please make sure that you have all the parts indicated before you begin assembly.
•
Items should be assembled on a soft surface to avoid scratching during assembly.
•
This product may need periodic tightening. We recommend tightening every 6 months.
•
Caution: Do not overtighten.
C
D
Back Panel
1
1
ATTENTION
TOOLS
I
J
Flat Washer
Allen Wrench
10
ASSEMBLY INSTRUCTIONS
1. Begin by placing the back panel (D)
upright on a soft surface. (Fig.1)
2. Attach the right arm (B) to the back
panel (D) using 2 small Allen bolts (G),
2 bolt caps (I) and 2 flat washers (J).
Do not tighten the bolts until all parts
are assembled together.
3. Repeat these instructions to attach the
left arm (A) to the back panel (D).
4. Attach the seat panel (C) to the right
arm (B) and the left arm (A) using 4
large Allen bolts (H), 4 bolt caps (I)
and 4 flat washers (J). (Fig.2)
5. Fasten the back (D) to the left armrest
(A) and the right armrest (B) using 2
large Allen bolts (H), 2 bolt caps (I)
and 2 flat washers (J). (Fig. 3)
6. Ensure all bolts are aligned and
assembled correctly.
7. Fully tighten all Allen bolts (G) and (H)
with the Allen wrench (K).
K
8. Place the seat cushion (E) and the
back cushion (F) onto the chair. (Fig.4)
1
Fig.1
B
A
J
D
G
I
B
Fig.2
C
A
I
H
J
D
Fig.3
J
H
I
C
F
Fig.4
E
B
A
Advertisement
