Advertisement
1
Toggles the unit between on mode (green LED) and standby mode (red LED).
Note: AC power cord must be connected and rear panel
ON
for this button to function.
Left knob
2
Rotate in either direction to select the desired input. Push and hold for ~3
seconds to enter the
down. Rotate the
option. To exit the
IR Receiver (concealed behind the front panel display window)
3
For receiving Infra-Red(IR) commands from the included hand-held remote
control or third-party remote control system.
Right knob
4
Rotate clockwise or counter-clockwise to increase or decrease the volume/
output level. Push and release to mute and unmute the output. When in the
MENU
, rotate to change the setting of the currently selected option.
1/4" Unbalanced Headphone Output Connection
5
Inserting a headphone connection automatically mutes the
SPEAKER
and
automatically un-mutes the
OUTPUTS.
Caution please lower the output level when inserting or removing
headphone connections as headphone sensitivity varies widely and a
comfortable speaker listening level may result in a significantly louder output
level when switching to headphones.
4.4mm Balanced T/R/R/S Headphone Output Connection
6
Inserting a headphone connection automatically mutes the
SPEAKERS
and
automatically un-mutes the
OUTPUTS.
Caution: please lower the volume / output level when inserting of
removing headphone connections as headphone sensitivity varies widely and a
comfortable speaker listening level may result in a significantly louder output
level when switching to headphones.
2
MENU
. Rotate to move the option selection arrow up or
Right knob
MENU
, press and hold this knob for ~3 seconds.
L & R PREAMP OUTPUTS
RIGHT & LEFT SPEAKER
:
L & R PREAMP OUTPUTS
RIGHT & LEFT SPEAKERS
to change the setting of the currently selected
. Removing a headphone connection
. Removing a headphone connection
9
3
4
POWER
switch set to
RIGHT & LEFT
and
L & R PREAMP
RIGHT & LEFT
and
L & R PREAMP
5
6
Advertisement
