MaxiiCopper Vi22001 Installation Manual

Vi2300A Mini Ethernet Extender over UTP Installation Manual
The MaxiiCopper Model Vi2300A Mini is a revolutionary data transmission
device that extends full-duplex high-speed Ethernet over existing UTP
infrastructures. It extends 10BaseT signals up to 3,000 feet (914m) and
100BaseT up to 2,100 feet (640m). It employs MaxiiCopper innovative
and unique Ethernet extension technology that is designed to take full
advantage of high-bandwidth networking cables and maintain a full-duplex
of 10 or 100 Mb/s Ethernet connection up to the maximum range with
minimum transmission error and latency.
The Vi2300A can connect multiple remote network devices, such as
Mega-pixel IP cameras or VoIP to a central LAN switching fabric with ease.
Its dual-rate capability feature provides an easy way to balance the best
possible network throughput and long-reach distance design. The Vi2300A
is a transceiver device that needs to be deployed on the camera side. It can
be used in conjunction with a Vi2301A or Vi25xx Extended Midspan. It is
equipped with LEDs to provide link status and data rate. No IP setting or
configurations are required and it is completely transparent to the corporate
IP network and higher layer protocols. The UTP cable needs to be point to
point without any branches. Multiple segments can be joined together using
UTP couplers.
Important Safety Warning
- Read these instructions.
- Keep these instructions.
- Follow all instructions.
- Heed all warnings.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Install in accordance with the manufacturer's instructions.
- This installation should be made by a qualified service person and should
conform to all local codes.
- DO NOT bundle UTP or Coax signals in the same conduit as high-voltage
wiring.
- To reduce the risk of fire or electrical shock, do not expose these products
to rain, moisture, dripping or splashing.
- No objects filled with liquids, such as vases, shall be placed on Vigitron
equipment.
- DO NOT install the unit in a place where the operating ambient tempera
ture exceeds 75° C.
- Make sure that the external power supply output voltage is in the recom
mended range.
- Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatus that produce heat.
- Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long
periods of time.
- Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as a power
supply cord or plug is damaged, liquid has been spilled, or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
- The mains plug is used as the disconnect device and shall remain readily
operable.
RISK OF ELECTRIC SHOCK
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
DO NOT OPEN
The Smart Choice for Transmission Solutions
WARNING! - To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. This apparatus should not be exposed to
dripping or splashing and no objects filled with liquids, such as vases should
be placed on the apparatus.
WARNING! - This apparatus is a Class I product. This product must
be connected to a mains socket outlet thru an AC to DC Power supply.
WARNING! - The main plug is used as the disconnect device and
should remain readily operable.
.
Application Drawing
Extending Ethernet and 74W PoE from a PoE Switch
90W PoE Switch
Vi2301A
The Vi2300A extends Ethernet and 74W PoE from a PoE switch.
Extending Ethernet and 74W PoE from a Switch & PoE Midspan
Network Switch
Vi22001
110/220VAC
Vi2301A
The Vi2300A extends Ethernet and 74W PoE from a PoE Midspan.
IP Camera-end Installation
- Ground the unit through the earth ground screw.
- If you like to power the unit using a local power supply, connect a 12VDC
power supply to the power connector of the Vi2300A. A power adapter
connector is provided to simplify connection.
- When using PoE, the camera has to be powered by PoE also.
- Connect the IP camera RJ45 connector to the "Standard Ethernet" port
of Vi2300A using a standard Cat5/6 cable of maximum 100 m in length.
- Connect one end of the long UTP cable to the "Extended Ethernet" RJ45
connector of Vi2300A.
The link LED on the 10/100 connector should be "ON" to indicate proper
connection between the camera and Vi2300A.
Ethernet Switch/NVR-end Installation
- If you like to power the unit using a local power supply, connect a 12VDC
power supply to the power connector of the Vi2301A. A power adapter
connector is provided to simplify connection.
- When using PoE, the camera has to be powered by PoE also.
- Connect the RJ45 connector of the Ethernet switch to the "Standard
Ethernet" port of Vi2301A using a standard Cat5/6 cable of maximum
328 feet (100 m) in length.
- Connect one end of the long UTP cable to the "Extended Ethernet" RJ45
connector of Vi2301A.
The link LED on the 10/100 Ethernet connector should be "ON" to indicate
proper connection between the switch and Vi2301A. While the Link LED,
Orange for 100BaseT and Green for 10BaseT, in a steady state will indicate
confirmed connection between extenders.
Maxii Copper
Vi2300A
Data + PoE
Data + 74W PoE
328 ft. (100m)
Extended Cat5/6
Vi2300A
Data + PoE
Data + + 74W PoE
328 ft. (100m)
Extended Cat5/6
www.vigitron.com
TM
60W PTZ Dome
60W PTZ Dome