11.2.4. CONNECT THE CABLE TO THE OUTDOOR UNIT
(For detail refer to Wiring Diagram at unit)
1. Remove the control board cover from the unit by loosen-
ing the screw.
2. Connecting cable between indoor unit and outdoor unit
shall be approved polychloroprene sheathed 4 × 1.5 mm
flexible cord, type designation 245 IEC 57 or heavier
cord.
3. Secure the cable onto the control board with the holder
(clamper).
4. Cable connection to the power supply (220-240V,
50 Hz) through knife switch (Disconnecting means).
• Connect the approved polychloroprene sheathed power
supply cable 3 x 4.0 mm
IEC 57 or heavier cord to the terminal board, and
connect the other end of the cable to knife switch
(Disconnecting means).
2
(C28GK), type designation 245
2
24