How To Install Your Microsd™ Card; Card - LG enV2 User Manual

your phone and the other end to a highpower USB port on your PC
(commonly located on the front panel of the computer).
Lower USB port is not supported, such as the USB port on your keyboard or bus-powered
NOTE
USB hub.
How to Install Your microSD™ Card
How to Remove Your microSD™ Card
1. Gently press and release the exposed edge of the microSD™ card to eject it.
2. Remove the microSD™ card from the slot and replace the cover.
Do not attempt to remove the microSD™ card while reading or writing to the card.
NOTE
G
Users wishing to transfer or download music onto a MicroSD™ card inserted into this phone
G
(through either MTP Sync or Over the Air) should format the MicroSD™ card on this handset
before using it through(Menu -> Settings & Tools -> Memory -> Card Memory -> Options ->
Format). Warning: Formatting the MicroSD™ card will erase all contents on the card. In the
event the MicroSD™ card is used on this phone without first formatting it,the phone will
display a "License acquisition failed" during OTA downloading or MTP Sync. Song files
downloaded or otherwise purchased from third party providers and stored on a MicroSD™
card inserted into this device may be protected or encrypted by such provider and cannot be
played on this device.
18
Getting Started with Your Phone
1. Locate the microSD™ slot on the right
2. Insert the microSD™ card in the
side of the phone and gently uncover
the slot opening (microSD™ slot cover
stays attached to the phone so you
don't lose it).
correct direction until it clicks into the
slot. If you insert the card in the wrong
direction, it may damage your phone or
your card.