JVC KD-LH1000 Instructions Manual page 27

7
Enter the color selecting mode.
8
Select the display color.
As you turn the control dial, the colors
change as follows:
O Aqua O Sky O Sea O
Every
1
*
Leaves O Grass O Rose O Cherry O
Orange O Honey O Violet O Grape O
Snow O User
1
* When you select "Every," the color changes
every two seconds (changing to all colors
listed above except "User.")
2
* When you select "User," one of the original
colors—"Day" or "Night" can be selected
depending on the "User" setting.
9
Repeat steps 5 to 8 to select the
color for each source (except when
selecting "All Source" in step 6).
10
Finish the setting.
26
O (back to the beginning)
* 2
Selecting or creating your own color
—User
You can create and store your own colors—"Day"
and "Night," and select one of them as the
display color for any desired source.
• Day: Can be used as your user color during
the day time (while the headlights are
turned off).
• Night: Can be used as your user color during
the night time (while the headlights are
turned on.)
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 23.)
2
Press 5 (up) or ∞ (down) repeatedly
until "Color" appears as the PSM
category on the left side of the
display.
3
Select "Mode."