Advertisement
Quick Links
TIM-900B-1, TIM-900B-LN Short Guide
(aka M0096 A)
Batch Total
Operation in
AUTO mode
AUTO key
to select and
confirm the
preset value
Short Guide
BULLETIN M 0096A REV.1
Total type (Total or
Resettable Total)
RESET key to reset
TIM-900
Dispensing nozzle for oil
and industrial fluids
Batch total
measurement
unit
Total
measurement
unit
Numeric keys
to set the
preset value
the Batch Total
and display the
Resettable Total
Advertisement
Related Manuals for American TIM-900
Summary of Contents for American TIM-900
- Page 1 AUTO key RESET key to reset to select and the Batch Total confirm the and display the preset value Resettable Total TIM-900 Short Guide Dispensing nozzle for oil and industrial fluids BULLETIN M 0096A REV.1...
- Page 2 If the TIM-900 is off, type Setting a new RESET to re-start it. PRESET value. The TIM-900 displays: If the TIM-900 is off, type RESET to re-start it. TIM-900 displays: Last amount dispensed. Non-resettable Total. Non-resettable Total. To select a new PRESET value (for To reset the Batch Total press example 12.3) use the numeric keys.
- Page 3 TIM-900 is ready to start dispensing PRESET value. in AUTO mode (see paragraph C). Selecting a PRESET value of frequent use. TIM-900 stores: Blinking AUTO last: message AUTO 1. the last PRESET value used To display the other stored values, press AUTO as many...
- Page 4 Now dispensing can dispensing (TOPPING UP): continue in AUTO mode Once dispensing has been carried out in AUTO mode, the TIM-900 • To stop manually dispensing in allows the user to continue the progress: dispensing operation, if necessary. Pull again the trigger completely and To carry out the TOPPING UP, then release it.
Need help?
Do you have a question about the TIM-900 and is the answer not in the manual?
Questions and answers