Page 2
NOTE: If you have a previous release of Precise Biometrics fingerprint identification software installed on your computer, please do the following before you install the Precise 100 Logon 2.1 software: 1) Make sure you have pass-through NOTE: The parallel port must be set to ECP PS/2 connector a backup password (see the chapter BioManager).
Page 3
Precise 100 Logon 2.1 3. To install the Precise 100 Logon 2.1 software, click the button and follow the instructions. 4. Restart the computer. Enrolling a User NOTE: If the CD does not start automatically, start the CD from the desktop by double-clicking My To enroll a user, see chapter four in the User's Guide.
Page 4
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To get more experience in logging on with your fingerprint, refer to the Precise Demo. Access the Precise Demo by clicking Start > Programs > Precise Biometrics > Demo...
Need help?
Do you have a question about the Precise 100 Logon 2.1 and is the answer not in the manual?
Questions and answers