Juniper AX411 Quick Start Manual

AX411 Access Point Connection Overview

To establish a wireless LAN using AX411 Access Points, you connect the access point
to the SRX Series device and to a power source, as shown in Figure 1.
Figure 1: AX411 Access Point Basic Connections
Omit power supply if
connecting access point
to Power over Ethernet
(PoE) port.
Table 1 describes the connections.
Table 1: AX411 Access Point Basic Connections
Connection
Access point antennas
Ethernet connection to SRX
Series device
For More Information
Installing The Ax411 Access Point Antennas
Connecting External Antennas to the AX411 Access Point
Connecting the AX411 Access Point to the SRX Series
Device
AX411 Access Point Connection Overview
1