Installing The Battery And Microsd Card - LG Ally User Manual

The Basics
24

Installing the Battery and microSD Card

It is important to fully charge the battery before initial use of the phone.
NOTE
The phone comes with a rechargeable battery. Keep the battery
charged while not in use in order to maximize talk, use, and standby
time. The battery charge level is shown at the top of the screen.
Installing the battery
1. Press the bump
on the bottom
part of the cover
and slide the
battery cover
upward to remove
from the back of
the phone.
Removing the battery
Turn power off. Remove the battery cover (as demonstrated in
the previous instructions). Then use the fingertip cutout to lift the
top edge of the battery out.
2. Align the battery
with the terminals
near the bottom
of the phone, then
press the battery
into place.
3. Replace the
battery cover over
the back of the
phone (as
demonstrated).
Slide the battery
cover downward
while applying
steady downward
pressure until it
clicks into place.