Summary of Contents for Flash Furniture TW-VN01516-NAT-GG
Page 1
To help prevent furniture from tipping over it must be permanently attached to the wall. Anti-Tip Safety Wall Straps suitable for the unit weight and wall materials (if not included) should be purchased and installed. Customer Service Ema il: CustomerExperience@belnick.com I Phone: 866-552-2810 TW-VN01516-NAT-GG / TW-VN01516-NAT-LGY-GG...
Page 4
STEP 1 Turn the table Top (Part A) upside down. Attach the Bottom (Part B) using (4) M6*15 Bolts (Part 3) and (4) M6 Iron Washers (Part 2). Tighten using Allen Wrench (Part 1). Allen Wrench r----�-----r----�----------------------------- Bottom :;;:;;+:��:...
Page 5
Thank you for your purchase! Rattan Chair with Cushion ASSEMBLY INSTRUCTIONS Before You Begin: Please indentify all component parts and hardware pieces required before you begin. Carefully remove all of the components from the packaging and set aside for assembly. Assemble on a soft surface to prevent scratching during assembly.
Page 7
CHAIR PARTS LIST: LEGS SEAT CUSHION PARTS...
Page 8
Turn Seat (Part B) upside down and attach Legs (Part A) using (4) M6*15 Bolts and (4) M6 Washers (Part 2). Tighten using Allen Wrench (Part 1). Legs Allen Wrench Seat Place Cushion (Part C) onto Seat. Cushion...