Canyon Creekside 3899401P Assembly Instructions

(94,95,96-804) CREEKSIDE COLLECTION FULL/FULL BUNK BED ASSEMBLY INSTRUCTIONS
PLEASE CONTACT YOUR RETAIL STORE FOR SERVICE OR REPLACEMENT PARTS REQUEST
READ ALL THE INSTRUCTIONS AND IDENTIFY ALL COMPONENTS AND CHOOSE YOUR CONFIGURATION AND BE SURE YOU HAVE ALL PARTS
DO NOT COMPLETELY TIGHTEN ALL BOLTS UNTIL ALL COMPONENTS ARE CONNECTED.
WARNING:
THE BED SLATS WILL NO SUPPORT A
MATTRESS ALONE, A SLAT PACK OR A
BUNKIE BOARD IS REQUIRED FOR
PROPER SAFETY.
(NOT INCLUDED)
MAKE SURE ALL BOLTS
ARE TIGHTENED
COMPLETELY
TO ASSEMBLE THIS
CONFIGURATION
REQUIRES TWO
PERSONS
REV 03 05/09/2019
CANYON FURNITURE COMPANY
THANK YOU FOR YOUR PURCHASE !
TWO PEOPLE ARE NEEDED TO ASSEMBLE.
FULL/FULL BUNK BED
1.- USE THE LONG END OF THE ALLEN WRENCH TO FASTEN
BOLTS LOOSELY AND QUICKLY.
2.- USE THE SHORT END OF THE ALLEN WRENCH FOR
FINAL TIGHTENING.
PAGE 1 OF 4
3899401P FULL/FULL BUNK BED (TAFFY)
36794015 94H-804 FULL BUNK END
36794015 94H-804 FULL BUNK END
35794014 94H-730 6 PIECE BUNK RAILS
35894016 94 H-720 LADDER
38200236 100-647 FULL SLAT ROLL
38200236 100-647 FULL SLAT ROLL
3899503P FULL/FULL BUNK BED (CHARCOAL)
36795031 95G-804 FULL BUNK END
36795031 95G-804 FULL BUNK END
35795030 95G-730 6 PIECE BUNK RAILS
35895032 95G-720 LADDER
38200236 100-647 FULL SLAT ROLL
38200236 100-647 FULL SLAT ROLL
3899602P FULL/FULL BUNK BED (STONE WASH)
36796021 96C-804 FULL BUNK END
36796021 96C-804 FULL BUNK END
35796020 96C-730 6 PIECE BUNK RAILS
35896022 96C-720 LADDER
38200236 100-647 FULL SLAT ROLL
38200236 100-647 FULL SLAT ROLL
TIPS: SEE ILLUSTRATION
BELOW
KIS01164-0