Disclaimer Content The content of this manual is for informational use only and is subject to change without notice. Focal Meditech BV assumes no responsibility or liability for any errors or inaccuracies Disclaimer that may appear in this document. Copyright Notice Periodically, changes may be made to the information in this manual;...
Manual introduction This is the user manual of the ADL-Stand. This product is developed, manufactured and distributed by Focal Meditech B.V. or one of its authorized representatives. This manual contains important information regarding the ADL-Stand, its intended use and possible consequences of usage. The aim of this information is to ensure successful, safe and effective use of the device.
Danger This label is positioned at the joint angle adjustment of ADL-Stand. This symbol in combination with the word “Warning” is used when there is important information to avoid certain actions that can lead to an equipment failure.
Failure of this can lead to malfunctioning and will void the warranty. 5026 SP Tilburg Netherlands Warning: In case of faulty device contact Focal Meditech. Do not try to fix it yourself. Failure of this will void the warranty. Tel.:...
Adjusting the height of the ADL-Stand Technical information In order to adjust the height of the ADL-Stand, loosen the knob for the height adjustment. The Rod system can be raised or lowered. Tighten the knob for the height adjustment when the ADL-Stand is at the desired height.
In order to adjust the angle of the ADL-Stand, loosen the clamping lever. The rod system can be If ADL-Stand is not used for a while it is recommended to fold the rod system. This will provide tilted up or down to the desired location. Tighten the clamping lever when the ADL-Stand is at a safe situation for both ADL-Stand and its surrounding.
There are no electrical / software controls available for ADL-Stand. The ADL-Stand can be used in combination with various accessories in order to use ADL-Stand for different activities. In some combinations, it is possible to use different accessories at the same time.
Maintenance hardware However the ADL-Stand can be used on its carrier there can be a need to mount it on an electric Do not place the device in direct sunlight or in the direct vicinity of a heat source, otherwise wheelchair.
ADL-Stand dimensions Appendix 1 Technical specifications Dimensions of the ADL-Stand are variable. This is because it is a product with moving parts with different configurations. Specifications ADL-Stand (with cup holder on moveable carrier) Mass ± 8 [kg] • Mass ADL-Stand...
Conditions and Warranty: direct supply by Focal Meditech to end users In the case of direct supply by Focal Meditech to end users, Conditions and Warranty are subject to the Consumer General Terms and Conditions issued by Koninklijke Metaalunie and in...