Advertisement
Quick Links
Item # CL-LS-697-3
Model # SP6973
USER MANUAL
QUESTIONS, PROBLEMS, MISSING PARTS?
BEFORE RETURNING TO THE STORE, CALL CUSTOMER SERVICE
8 A.M. - 5 P.M., CST, MONDAY - FRIDAY
877-430-0703
Send
THANK YOU
We appreciate the trust and confidence you have placed in Country Living through the purchase of this electric fireplace . We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Country Living !
Advertisement
Related Manuals for Country Living SP6973
Summary of Contents for Country Living SP6973
- Page 1 THANK YOU We appreciate the trust and confidence you have placed in Country Living through the purchase of this electric fireplace . We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home...
-
Page 2: Table Of Contents
Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Operation . -
Page 3: Important Safety Instructions
Important Safety Instructions Please read and understand this entire manual before attempting to 15. This appliance has hot and arcing or sparking parts inside. assemble, operate or install the product. When using electrical appliances, basic precautions should always be used as a drying rack for clothing. Christmas stockings or decorations should not be hung in the area of it. -
Page 4: Warranty
Important Safety Instructions (continued) ELECTRICAL CONNECTION □ A 15-amp, 120-volt, 60 Hz circuit with a properly grounded outlet is required. Preferably, cause the circuit breaker to trip or the fuse to blow when the heater is in operation. The DO NOT exceed the current rating of the current tap. ALWAYS plug this unit directly into a wall outlet/receptacle. -
Page 5: Pre-Installation
Pre-Installation PRODUCT SPECIFICATIONS Voltage 120 VAC, 60 Hz Amps 11.7 amps Watts 1400 watts Operation Adjustable Thermal Control Heater Flame Power Control Panel Power Flame Heater... - Page 6 Operation (continued) Powering the Log Set Heater to Flame Button Power Button □ □ Press this button into the “I” position for main power to the settings at High, Medium and Low. unit. □ the highest setting. □ Each time the Flame button is pressed, the brightness completely is to turn off the Power switch.
-
Page 7: Fcc/Ic Information
FCC/IC Information Please read and understand this entire manual before attempting to assemble, operate or install the product. This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. - Page 8 Care and Maintenance (Continued) NOTE: When the heater is not in use, the heater should be stored in a dry location, away from possible damage. The power cord should be stored properly to avoid contact with hot or sharp objects. Replacing the Remote Control Batteries When the remote control stops operating or its range seems reduced, it is time to replace the batteries.
-
Page 9: Troubleshooting
Troubleshooting Problem Possible Cause Corrective Action Check that the unit is plugged into a standard There is no power and the logs do not glow. The unit does not have power. 120-volt outlet. Then make sure power is set to the “ON” position. Unplug the unit and wait 5-10 minutes to All function keys are inactivated, and the The overheat protection device has been... - Page 10 Questions, problems, missing parts? Before returning to the store, call Customer Service 8 a.m. - 5 p.m., CST, Monday - Friday, 877-430-0703 EMAIL: resolutions@electricfireplacesdirect.com Retain this manual for future use.