Table of Contents
Advertisement
Additional features
Sleep Mode
1. Press the Sleep Mode Auto button to set the time
you want the unit to turn off automatically.
2. The Timer is programmed in one-hour increments
by pressing the Sleep Mode Auto button 1 to 7
times.
The sleep mode is available for 1 to 7 times. To
alter the time period in steps of 1 hour, press the
Sleep Mode Button while aiming at air conditioner.
3. Make sure the Sleep Mode Auto LED lights up.
Setting the Time
1. Time can be set only when you have pressed
the Reset button. If you have just replaced the
batteries, the Reset button should be pressed to
reset the time.
Press the Start/Stop button.
Delay Start/Pre-Set Stop
1. Make sure the time is set correctly on the remote
control display.
2. Press the ON/OFF Timer
buttons to turn Timer on or off.
3. Press the Time Setting
buttons until the desired
time is set.
NOTICE
Select one of the following four types of operation.
Delay OFF Timer
2. Press the Time Setting buttons until the desired
3. Press the Timer SET button.
4. Press the selected on/off setting by
ON
OFF
To cancel the timer setting
Delay ON Timer
Delay OFF and ON Timer Delay ON and OFF Timer
To cancel the Sleep Mode, press the sleep Mode
Auto button several times until the star
(
) disappears from the operation display.
NOTICE
The Sleep Mode will be operated at slow fan
speed (cooling) or medium fan speed (heat
pump only) for quiet sleeping.
IN COOLING MODE OR HEALTHY
DEHUMIDIFICATION MODE:
The temperature will automatically rise by
1°C (2.0°F) over the next 30 minutes and by 2°C
(4.0°F) in 1 hour for comfortable sleeping.
time is set.
NOTICE
Check the indicator for A.M. and P.M.
pressing the Timer SET button while
aiming the remote control at the signal receptor.
Press the Timer Cancel button while
aiming remote control at the signal
CANCEL
receptor.
(The timer lamp on the air conditioner and
the display will go out.)
with the unit running
Owner's Manual 19
Operating Instruction
SET
SET
Hide quick links:
Advertisement
Table of Contents
