Forced Operation; Auto Restart; Helpful Information - LG LM360CE Owner's Manual

Forced Operation

Operation procedures when the remote control can't be used.
Open the front panel upward and move the Slide Switch to the
Forced Operation position.
If you want to stop operation, move the Slide Switch to the Auto
Restart or the Remote Control position.
In case the power comes on again after power failure on the Forced
Operation position, the operating conditions are automatically set as
follows:
During Forced Operation, the initial mode continues.
Cooling Model
Operating mode Cooling
Indoor FAN Speed High
Setting Temperature 22°C(72°F)

Auto restart

In case the power comes on again after a power failure, Auto
Restarting Operation is the function to operate procedures
automatically to the previous operating conditions.
If you want to use this operation, Open the front panel
upward and move the slide switch to the Auto Restart
position.
If you do not want to use this operation, move the Slide
Switch to the Remote Control position.

Helpful information

Fan speed and cooling capacity.
The cooling capacity indicated in the specification is the
value when the fan speed is set to high, and the capacity will
be lower at low or medium fan speed.
High fan speed is recommended when you wish to cool the
room quickly.
Room Temp. 24°C(76°F) 21°C(70°F) Room Temp. < 24°C(76°F) Room Temp. < 21°C(70°F)
Cooling
High
22°C(72°F)
Open the front
panel upward
Heat pump Model
Healthy Dehumidification
High
23°C(74°F)
Open the front
panel upward
When you are out for a while, put the
Slide Switch on the Remote Control.
Additional features
Slide Switch
FORCED
OPERATION
Slide
AUTO
Switch
RESTART
REMOTE
CONTROL
Heating
High
24°C(76°F)
Slide Switch
FORCED
OPERATION
Slide
AUTO
Switch
RESTART
REMOTE
CONTROL
Owner's Manual 19