Important Information - DCL Camatics VT2500 Fittings Manual

Table of Contents

Advertisement

2 I
I
MPORTANT
NFORMATION
If you have any questions or concerns regarding this document, the hardware you have received
or the requirements of your Camatics Insurance Policy, please contact you broker immediately.
Before you begin installing and commissioning the system, please ensure that you have read this
manual thoroughly, referring to any supplementary information provided for the unit as
required.
Care must be taken in the routing of all cables so that the insulation does not become worn or
damaged.
Unauthorised modification to this equipment or associated accessories is forbidden without the
expressed permission and agreement from the product manufacturer.
This equipment should not be operated in hazardous environments i.e. areas that contain
explosive materials or flammable vapours.
This equipment should not be operated within aircrafts or in close proximity to medical
equipment.
This equipment may only be located in a position where it cannot interfere with the normal
operation of the vehicle or present a hazard to the driver or passengers.
Failure to comply with the following Warnings, Approval and Safety information may invalidate
warranty, certification or type approval of this product.
All installation and service work must be carried out in accordance with FCS1362, FCS1372,
RQAS, 95/54/EC, ISO 21609 and / or any other statutory guidelines or Directives currently in
force. Therefore it is strongly recommended that the unit is installed and commissioned by
suitably trained and qualified installation personnel with accreditation.
Under no circumstances may any part of the product be installed inside the engine
compartment area.
Unauthorised changes or alterations to the equipment or the installation will invalidate
certification issued by the Approved Accreditation Bodies and may also affect the vehicle
manufacturers warranty
2

Advertisement

Table of Contents
loading

Related Products for DCL Camatics VT2500

Table of Contents