Correct Method Of Measurement; Parts Identification - Yuezhongxing Technology W202 Manual

3. Refrain from eating, smoking, and drinking (especially alcoholic beverages
) before a measurement since these activities can affect your blood
pressure.
4. Remember that blood pressure varies continuously throughout the day.
Try to take your blood pressure at the same time each day.
5. Do not be concerned with the results of one measurement. Many
measurements, recorded over a long period of time, will provide a better
indication of your blood pressure.
6. Please relax for 5 to 10 minutes before taking another measurement.
7. Many factors can affect your blood pressure such as exercising, eating ,
talking, moving, nervousness, environment and temperature changes,
emotional stress can cause an increase in blood pressure Daily
fluctuations of 25 to 50 mmHg are common.
Please note:
Some individuals with hypertension, diabetes, kidney disorders,
arteriosclerosis or poor circulation may see a significant difference in blood
pressure readings taken from the wrist as compared to readings from the
upper arm.It is recommended that you consult with your physician
concerning the use of this monitor.
Display of Automated Wrist Blood Pressure Monitor
"M" or "MAP" for the value of MEAN ARTERIAL PRESSURE
22

Correct Method of Measurement

To obtain the most accurate blood pressure measurement, please follow
these important directions.
.Be seated in a chair with back support.
.Position your arm,so the cuff is at the same
level as your heart.
.Place both feet on the ground
IMPORTANT:
The wrist cuff must be at the same level as your heart, or accurate
measurement will not possible.(Your heart is located slightly below your left
armpit.)

Parts Identification

Monitor:
Ｓｅｔ Ｂｕｔｔｏｎ
Ｍｅｍｏｒｙ Ｂｕｔｔｏｎ
Ｂａｔｔｅｒｙ Ｃｏｖｅｒ
ＬＣＤ Ｄｉｓｐｌａｙ
ＯＮ／ＯＦＦ Ｂｕｔｔｏｎ
Ｗｒｉｓｔ Ｃｕｆｆ
23