Advertisement
Quick Links
SIDE TABLE
klaxon Eagan Side Table
Installation Instructions
1. This product should only be installed by someone who fully understand the installation instructions.
2. Make sure that the supporting surface will safely support the combined load of the equipment, hardware
& components
3. Never exceed the maximum load capacity.
4. Always use assistant or mechanical lifting equipment, if needed, to safely lift & position equipment.
5. Tighten screws firmly, but do not over-tighten. Over-tightening can damage the screw & reduce their
holding power
6. This product is intended for indoor use only. Using this product outdoors could lead to product failure
& personal injury.
Component Checklist
Installation Steps
STEP 1
FIX ALL Minifix-Screws and Minifix-Drums:
MINIFIX SET
DRUM INSERTING
PUSH DOWN
Note: Make sure
Drum inserting
as same as above
diagram.
SCREW INSERTING
Note: Tight the screw clock-vise till
the thread disappear.
STEP 2
Unlock Mode:
Note: Make sure all the given points otherwise
it will not fix properly.
Minifix-Drum
Arrow at Hole
Side Before
Inserting Minifix-Screw
STEP 3
Lock Mode:
Note: Use Key or Screw Driver.
Tight Minifix-Drum
Clock-wise
Till It Stops
and Fits properly
STEP 4
Connect B with C:
Note: Tight all Minifix-Drum Properly.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Klaxon G0223IT0151
Summary of Contents for Klaxon G0223IT0151
- Page 1 Note: Make sure all the given points otherwise it will not fix properly. SIDE TABLE Minifix-Drum klaxon Eagan Side Table Arrow at Hole Installation Instructions 1. This product should only be installed by someone who fully understand the installation instructions.
- Page 2 STEP 5 Connect D with B: Note: Tight all Minifix-Drum Properly. INSTALLATION GUIDE STEP 6 SIDE TABLE Connect A to Above Set with D, B, C: klaxon Eagan Side Table Note: Tight all Minifix-Drum Properly.
Need help?
Do you have a question about the G0223IT0151 and is the answer not in the manual?
Questions and answers