Table of Contents
Advertisement
Target Readers
Purpose
Organization
How to Read This Manual It is assumed that the readers of this manual have general knowledge of logic circuits
Conventions
INTRODUCTION
This manual is intended for engineers who understand the functions of the µ PD77016
Family and µ PD77111 Family and wish to design application programs using these
products.
The µ µ µ µ PD77016 Family is used to refer collectively to the µ µ µ µ PD77015, 77016, 77017,
77018, 77018, 77018A, 77019, and 77019-013. However, the µ µ µ µ PD77016 is not one of
the target devices in this manual.
The µ µ µ µ PD77111 Family is used to refer collectively to the µ µ µ µ PD77110, 77111, and
77112.
This manual is designed to give you an understanding of the basic specifications of the
IE-77016-CM-LC and its correct use.
This manual consists of the following chapters.
CHAPTER 1 GENERAL
CHAPTER 2 PART NAMES AND FUNCTIONS OF COMPONENTS
CHAPTER 3 INSTALLATION
and microcontrollers. The IE-77016-CM-LC is used connected to the IE-77016-98/PC in-
circuit emulator. This manual describes the basic setup procedure and how to connect
the IE-77016-CM-LC to the IE-77016-98/PC.
For additional information on the IE-77016-98/PC, refer to the IE-77016-98/PC User's
Manual.
To understand the basic specifications and use method
→ Read this manual in the order of the CONTENTS.
To learn about the operation method of the ID77016, the function of commands, and
software settings
→ Read the ID77016 User's Manual (separately available)
Data significance:
Active low representation: ××× (overscore over pin or signal name)
Note:
Caution:
Remark:
Numerical representation: Binary ... ×××× or 0b××××
User's Manual U14139EJ1V0UM00
Higher digits on the left and lower digits on the right
Footnote for item marked with Note in the text
Information requiring particular attention
Supplementary information
Decimal ... ××××
Hexadecimal ... 0×××××
5
Advertisement
Table of Contents
