Saving The Current Routing State - Gefen Pro GEF-MOD-32432-DVI User Manual

OPERATING THE 32X32 MODULAR MATRIX
1. Set the routing state (see page 22), then press the PreSet button twice to activate
Preset Mode.
After pressing the PreSet button once, the following will be displayed on the front-
panel LCD screen:
Press the PreSet button again. The following will be displayed on the
front-panel LCD screen:

Saving the current Routing State

PRESET MODE
RECALL SAVED STATE
PRESET MODE
SAVE CURRENT SET
27
Press the PreSet button twice