Advertisement
1) Input Toshiba Pattern (#16) to Video Input.
2) Select 04. Option-1 -> 10. Video Port.
3) Set 10. Video Port equal to Video.
4) At Main SVC Menu, select 01. Picture Improvement -> 01. White Balance.
5) Adjust Items 01 - 08 as performed in DVI mode.
6) Return to Main SVC menu and select 04. Option-1 -> 10. Video Port.
7) Set 10. Video Port equal to Graphic.
8) At Main SVC Menu, select 01. Picture Improvement -> 01. White Balance.
9) Adjust Items 01 -> 08 as performed in DVI Mode.
* Thus, Micom saves the W/B data separately for each memory mode of the block (See the block diagram given below) during
W/B adjustment.
RF
VIDEO
YPbPr
DTV
CXA2151
COMP1,2
PC
(A-RGB)
DVI
(D-RGB)
Samsung Electronics
VSP9437
V-PEAKING
Scaler
RGB/YUV
CONTRAST
BRIGHT
SW
RGB
IC
RGB
SIL169
FLI2310
ASI510
Y-Delay
C-Delay
Brightness
Video
Contrast
Port
Saturation
AD9883
Adjustment
RGB-cont
Reg
Y/R-gain
RGB-bri
Cr/B-gain
Cb/G-gain
R-gamma
G-gamma
Y/R-offset
B-gamma
Cr/b-offset
Cb/G-offset
Memory
Mode
Graphic
Analog PC
Port
- Auto Color
S/W
value(RGB)
DTV Mode
Alignment and Adjustments
DNIe
Logic
Adjustment
Reg
Adjustment
R-dri
Reg
G-dri
B-dri
Bri-offset
R-cutoff
Con-offset
G-cutoff
B-cutoff
Memory
Memory
Mode
Mode
- DVI
- DVI
- PC
- PC
- Video
- Video
- Component(DTV)
- Component(DTV)
Different adjustment values will be applied
to DVI, PC ,DTV(Component) and Video mode.
2-3
Advertisement
