EXAGATE SYSGuard 7001 Installation Manual

Welcome to
INTRODUCTION
Box Contents
 SYSGuard 7 001 Main Unit
 1 Assembly Screws
 Mounting Kit
 Power Cable
Step 1
Plug-in Power Cable to SYSGuard 7 001 Main Unit. Wait for the "READY" LED. When the LED
comes online SYSGuard 7 001 Main Unit is ready to run.
Step 3
Write 192.168.1.234 on the address bar of
your browser (for instance Internet Explorer) and
press Enter button.
Homepage of the SYSGuard 7 001 Main Unit is as
follows: Default user name is "admin" and
password is "123456".
Head Office
A: Yeşilce Mh. Doğa Sk. Kökten Plaza No:6 Kat:2 34418 Kağıthane - İstanbul
T: +90 212 275 73 22 F: +90 212 275 73 66
E: info@exagate.com
SYSGuard 7001 Main Unit Quick Installation Guide
Before Installation!
Make sure your device is properly
mounted and ready to operate
safely.
Step 2
Main unit is equipped with default IP address
(192.168.1.234). For the first access to the
device a PC must be used to access the main
unit and devices should be connected to the
same network.
Your PC should have a static IP in order to
access SYSGuard 7 001. You can carry out
these settings in TCP/IP Settings sections of
Local Area Network Connection options.
Support
support@exagate.com