Advertisement
Quick Links
PRODUCT MANUAL
PRODUCT MANUAL
ELECANE SMALLEST
BARK COLLAR
Thank you for purchasing the Elecane Bark Collar.
The product has been specially developed for small
dogs and their owners.
Dear dog lovers, our company and its employees love
pets and don't want to do any harm to them. That's
why only humane ways of influence, such as sound
warning and vibration, are used in our bark correction
collars.
Based on different testing models of the Elecane,
it achieves an efficiency of 75-80% with the dogs
that stopped barking within one week. 10-15% of
dogs need up to two weeks, and about 5% of dogs
need more time. Unfortunately, 3-5% of dogs aren't
susceptible to bark correction through exposure to
sound and vibration.
| 1
MODEL DC-656
Advertisement
Related Manuals for ELECANE DC-656
Summary of Contents for ELECANE DC-656
- Page 1 PRODUCT MANUAL ELECANE SMALLEST BARK COLLAR MODEL DC-656 Thank you for purchasing the Elecane Bark Collar. The product has been specially developed for small dogs and their owners. Dear dog lovers, our company and its employees love pets and don't want to do any harm to them. That's...
-
Page 2: Principle Of Operation
PRINCIPLE OF OPERATION The main element of the Elecane bark collar is the sensor. It recognizes and detects your dog’s throat vibration (barking). The sensor detects barking, and the collar is activated, affecting the dog with a vibro-sound warning. - Page 3 LEVELS OF CORRECTION 5th bark 5 secs 2 secs 6th bark 2nd bark 8th bark 5 secs 3 secs 1st bark 4th bark 1.5 secs Sleep mode. For the dog’s safety the collar turns off 7th bark 3rd bark 5 secs 1.5 secs 1.5 secs for 1 minute.
- Page 4 6th bark: sound for 5 seconds + vibration for 3 seconds 7th bark: sound for 5 seconds + vibration for 4 seconds 8th bark: Sleep mode. For the dog’s safety the collar turns off for 1 minute. IMPORTANT! 1. The collar moves to the next correction level consistently and only if the dog continues to bark.
- Page 5 THE FIRST USAGE For the collar to start working: 1. To charge collar 1.5-2 hours. 2. Turn on the collar before use. Press t h e button and hold for 3 seconds. The collar will beep, and the indicator will turn green. 3.
- Page 6 How to put a collar on a dog: 1. Check whether the collar fits tightly or not. If necessary, adjust it. You must cut the excess strap. 2. Install the collar block in the middle of the strap. Note that the collar block moves along the strap as you pull on it.
-
Page 7: Testing The Collar
Charging time: 1.5-2 hours Work time: The battery charge lasts up to 14 days with ordinary use. Time of non-stop working: 6-7 hours IMPORTANT! The work time of the battery can vary depending on the frequency of the collar activation. TESTING THE COLLAR BEFORE USING Take the collar in your hands, facing the back side of... - Page 8 ADJUSTING THE SENSITIVITY There are two BUTTONS , which are used to adjust the sensitivity. The higher the sensitivity level is, the easier it is to trigger the collar. Press the button for a short while until the collar ceases to emit a signal when the button is pressed. It will be the mode of the lowest sensitivity of the collar (the 1st).
- Page 9 It would be best if you found the sensitivity level of your dog by experimentation. After turning off and turning back on the collar your settings will remain. PUT THE COLLAR ON THE DOG IMPORTANT! The correct placement and settings of the collar are essential for its effective work.
- Page 10 6. Let your dog wear the collar for a couple of minutes and then check again if it fits well. When the dog gets used to the collar, double-check the correct placement of the collar. IMPORTANT! If you don’t tighten the strap tight enough, it won’t work correctly.
- Page 11 IMPORTANT! If our product didn't help you solve the problem with excessive barking, don't hesitate to contact our support team at support@elecane.com, and we will help you or reimburse the purchase. | 11...
Need help?
Do you have a question about the DC-656 and is the answer not in the manual?
Questions and answers