Table of Contents
Advertisement
• Optional: Click on Configure Status Page in the Printer column to
define power-up status page settings, e.g., disabling the power-up
status page.
• The changes made to the NIC do not take effect until the unit is reset.
Click on Reset in the System column and click on the Reset Unit but-
ton. After a few seconds the screen should report that the unit was
reset.
5. Confirm Successful Configuration.
• After the Reset, the program advises waiting 2 minutes before recon-
necting, but the NIC may be available sooner. From the Options
menu, select Update Server List and click the Down Arrow to display
the list of Servers. Repeat if necessary until the NIC reappears and
select it from the list.
• At the NIC configuration page, select Unit Status in the System col-
umn.
• Scroll down to display the NetWare Status. The Queue Status should
be Attached.
• If the Queue Status is not Attached, please verify that the entries for
Print Server Name, Preferred NDS Context, and Print Server Pass-
word match those defined in PCONSOLE or refer to the troubleshoot-
ing section in the Owner's Manual.
9
Advertisement
Table of Contents
